Quality Control Technician
HANOVER, PA
1 DAYS AGO
22527273
Summary
HANOVER, PA
In-Person
$25.00 - $27.00 per Hour
3 Years Experience
High school graduate or equivalency certificate (GED)
No Commission
40.00 hours per week / Day Shift / Full-Time
Description
ESSENTIAL DUTIES:
Inspects or validates results for first machined piece set up and restart parts using information on the blueprints and QCIs; will document all data on the print and first piece forms and must be able to make the decision to run the job based on the inspection results
Responsible for communicating to a machine operator and supervisor a defect or unusual condition requiring investigation or corrective action in the form of machine shutdown, adjustments, part sorting, etc
Document first piece inspection results directly on the blueprint provided in the routing package
Conduct defined in-process and shift-based inspections per control plan requirements
Cover at least two machining operation areas (e.g., pistons and inputs or rotaries and sectors)
Record inspection results using official QCI documentation and follow escalation protocols for nonconformances
Support red tag process by identifying, tagging, and segregating suspect product pending disposition
Perform CMM calibration routines at the start of the shift and after any changeovers
Use hand tools, air gauging, CMMs, and RAM Optical devices as required by control plans
Participate in MSA and capability studies as directed by Quality Engineering or Quality Control Lead
Complete run charts, control charts, etc. as required by the control plan in the designated area
Be trained and competent on all inspection methods and measurement tools specified in the control plan including CMM, RAM optical, bore gauge, snap gauge, O.D. (Outside Diameter) and depth micrometers, scale dial vernier, height vernier, dial and digital indicators, radius gauges, protractor, thread gauge, plug gauge, surface plates, special checking fixtures, and various gauging specific to our product lines
Other duties as assigned
CORE COMPETENCIES:
Attention to Detail: Demonstrates ability to focus on critical details and notice non-conformances
Self-Motivated: Demonstrates ability to take initiative and drive to achieve results.
Communication: Demonstrates ability to convey and distribute information effectively and encompasses strong speaking, presentation, written and listening skills. Ability to create an environment for open communication.
Teamwork: Demonstrates ability to work well with others to accomplish common goals and build a positive climate and trusting relationships within teams.
Reliability: Demonstrates dependability, accountability, and trust. Follows processes and meets commitments.
WORKING ENVIRONMENTAL CONDITIONS:
May be exposed to moderate heat, light dust, fumes, extreme temperatures, noise and hazards such as electrical shock or gases. Some outside assignments could involve exposure to adverse weather conditions. Adequate hearing protection is required for 85 decibels and above.
SUPERVISORY RESPONSIBILITY:
This position does not require any supervisory duties.
SCHEDULE:
8-hour Day Shift Monday through Friday
The demands described here represent those that an employee must meet to perform the essential functions of this job successfully. Reasonable accommodations may be made to enable individuals with disabilities to perform these functions.
Requirements
QUALIFICATIONS:
High School Diploma or GED or 3 years of related work experience in manufacturing setting
Basic MS Office skills (Word, Excel, Outlook, PowerPoint, Teams)
Knowledge of basic mathematics, i.e. decimals, fractions, algebra, and geometry
Ability to read and comprehend blueprints and geometric tolerancing or ability to learn this skill within first month of employment
Other duties as assigned; required being very flexible in their daily job assignments; cross-training is a must to assure this flexibility
Salary Description
$25-27 depending on experience
Additional Details
How To Identify Potential Job Scams
APPLY ON EMPLOYER'S WEBSITE
Save Job
Print
Share This Job
Similar Jobs
Automation Technician
HANOVER, PA
Pest Control Technician Trainee
YORK, PA
Construction Inspector
YORK, PA
Electrical, Instrumentation, and Controls Technician
SPRING GROVE, PA
Intern-Technician (Electronics)
MOUNT HOLLY SPRINGS, PA
Copyright2026Commonwealth of Pennsylvania
Governor Josh Shapiro
SSR 849: JobPostingDetails | Build: 19.3.5.65 (4/23/2026 12:14:05 PM) | Server: LIEDCPRWBCWD004 | Database: Database Instance
HANOVER, PA
1 DAYS AGO
22527273
Summary
HANOVER, PA
In-Person
$25.00 - $27.00 per Hour
3 Years Experience
High school graduate or equivalency certificate (GED)
No Commission
40.00 hours per week / Day Shift / Full-Time
Description
ESSENTIAL DUTIES:
Inspects or validates results for first machined piece set up and restart parts using information on the blueprints and QCIs; will document all data on the print and first piece forms and must be able to make the decision to run the job based on the inspection results
Responsible for communicating to a machine operator and supervisor a defect or unusual condition requiring investigation or corrective action in the form of machine shutdown, adjustments, part sorting, etc
Document first piece inspection results directly on the blueprint provided in the routing package
Conduct defined in-process and shift-based inspections per control plan requirements
Cover at least two machining operation areas (e.g., pistons and inputs or rotaries and sectors)
Record inspection results using official QCI documentation and follow escalation protocols for nonconformances
Support red tag process by identifying, tagging, and segregating suspect product pending disposition
Perform CMM calibration routines at the start of the shift and after any changeovers
Use hand tools, air gauging, CMMs, and RAM Optical devices as required by control plans
Participate in MSA and capability studies as directed by Quality Engineering or Quality Control Lead
Complete run charts, control charts, etc. as required by the control plan in the designated area
Be trained and competent on all inspection methods and measurement tools specified in the control plan including CMM, RAM optical, bore gauge, snap gauge, O.D. (Outside Diameter) and depth micrometers, scale dial vernier, height vernier, dial and digital indicators, radius gauges, protractor, thread gauge, plug gauge, surface plates, special checking fixtures, and various gauging specific to our product lines
Other duties as assigned
CORE COMPETENCIES:
Attention to Detail: Demonstrates ability to focus on critical details and notice non-conformances
Self-Motivated: Demonstrates ability to take initiative and drive to achieve results.
Communication: Demonstrates ability to convey and distribute information effectively and encompasses strong speaking, presentation, written and listening skills. Ability to create an environment for open communication.
Teamwork: Demonstrates ability to work well with others to accomplish common goals and build a positive climate and trusting relationships within teams.
Reliability: Demonstrates dependability, accountability, and trust. Follows processes and meets commitments.
WORKING ENVIRONMENTAL CONDITIONS:
May be exposed to moderate heat, light dust, fumes, extreme temperatures, noise and hazards such as electrical shock or gases. Some outside assignments could involve exposure to adverse weather conditions. Adequate hearing protection is required for 85 decibels and above.
SUPERVISORY RESPONSIBILITY:
This position does not require any supervisory duties.
SCHEDULE:
8-hour Day Shift Monday through Friday
The demands described here represent those that an employee must meet to perform the essential functions of this job successfully. Reasonable accommodations may be made to enable individuals with disabilities to perform these functions.
Requirements
QUALIFICATIONS:
High School Diploma or GED or 3 years of related work experience in manufacturing setting
Basic MS Office skills (Word, Excel, Outlook, PowerPoint, Teams)
Knowledge of basic mathematics, i.e. decimals, fractions, algebra, and geometry
Ability to read and comprehend blueprints and geometric tolerancing or ability to learn this skill within first month of employment
Other duties as assigned; required being very flexible in their daily job assignments; cross-training is a must to assure this flexibility
Salary Description
$25-27 depending on experience
Additional Details
How To Identify Potential Job Scams
APPLY ON EMPLOYER'S WEBSITE
Save Job
Share This Job
Similar Jobs
Automation Technician
HANOVER, PA
Pest Control Technician Trainee
YORK, PA
Construction Inspector
YORK, PA
Electrical, Instrumentation, and Controls Technician
SPRING GROVE, PA
Intern-Technician (Electronics)
MOUNT HOLLY SPRINGS, PA
Copyright2026Commonwealth of Pennsylvania
Governor Josh Shapiro
SSR 849: JobPostingDetails | Build: 19.3.5.65 (4/23/2026 12:14:05 PM) | Server: LIEDCPRWBCWD004 | Database: Database Instance
Job ID: 519191759
Originally Posted on: 4/29/2026
Want to find more Quality Control opportunities?
Check out the 33,394 verified Quality Control jobs on iHireQualityControl
Sign Up for Job Alerts
