Qa/Qc Inspector II

We are seeking a Quality Control inspector with experience in MPI, LPI, UTT and dimensional to join our Quality Control team. The successful candidate will be responsible for performing QC receiving inspection, dimensional inspection and completion of NDE disciplines on a variety of materials and components to ensure compliance with industry standards and Canrig specifications.

To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

• Excellent problem-solving and analytical skills

• Experience in MPI, LPI, UTT and dimensional

• Coordinate Measuring Machine Experience Preferred (Keyence, Hexagon Romer, Faro, etc.)

• Attention to detail.

• Basic computer and math skills to calibrate and measure.

• In-depth understanding of company standards

• Up -to -date knowledge of federal and industry standards

• Understanding of target market and consumer needs

• Blueprint reading capabilities.

• Documenting and reporting skills

• Teamwork and collaboration

EDUCATION and/or EXPERIENCE

• One year certificate from a college or technical school; or two to three years related experience and/or training; or equivalent combination of education and experience.

• Experience in MPI/LP/UTT familiar with ASNT-TC-1A or Equivalent standards.

LANGUAGE SKILLS

• Ability to read, analyze, and interpret engineering drawings, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.

MATHEMATICAL SKILLS

• Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations.

REASONING ABILITY

• Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form.

COMPUTER SKILLS

• General knowledge of word processing software, spreadsheet software, E-Mail messaging, and manufacturing/inventory software.

CERTIFICATES, LICENSES, REGISTRATIONS

• Valid Driver's License

BEHAVIORAL COMPETENCIES

• Problem Solving - Identifies and resolves problems in a timely manner, gathers and analyzes information skillfully, develops alternative solutions, works well in a problem-solving situation, uses reason when dealing with emotional topics.

• Technical Skills - Assesses own strengths and weaknesses; Pursues training and development opportunities; Strives to continuously build knowledge and skills; Shares expertise with others.

• Oral communication - Speaks clearly and persuasively in positive or negative situations; listens and gets clarification; Responds well to questions; Demonstrates group presentation skills; Participates in meetings.

• Written Communication - Writes clearly and informative; Edits work for spelling and grammar; Varies writing style to meet needs; Presents numerical data effectively; Able to read and interpret written information.

• Teamwork - Balances team and individual responsibilities; Exhibits objectivity and openness to others' views; Gives and welcomes feedbacks; Contributes to building a positive team spirit; Puts success of team above own interest; Able to build moral and group commitments to goals and objectives; Supports everyone's efforts to succeed.

• Ethics - Treats people with respect; Keeps commitments; Inspires the trust of others; Works with integrity and ethically; Upholds organizational values.

• Organizational Support - Follows policies and procedures; Completes administrative tasks correctly and on time; Supports organization's goals and values; Benefits organization through outside activities; Supports affirmative action and respects diversity.

• Judgment - Displays willingness to make decisions; Exhibits sound and accurate judgement; Supports and explains reasoning for decisions; Includes appropriate people in decision making process; Makes timely decisions.

• Motivation - Sets and achieves challenging goals; Demonstrates persistence and overcomes obstacles; Measures self against standard of excellence.

• Planning/Organizing - Uses time efficiently; Plans for additional resources; Sets goals and objectives.

• Professionalism - Approaches others in a tactful manner; Reacts well under pressure; Treats others with respect and consideration regardless of their status or position; Accepts responsibility for own actions; Follows through on commitments.

• Quality - Demonstrates accuracy and thoroughness; Looks for ways to improve and promote quality; Applies feedback to improve performance; Monitors own work to ensure quality.

• Safety and Security - Observes safety and security procedures; Determines appropriate action beyond guidelines; Reports potentially unsafe conditions; Uses equipment and materials properly.

• Adaptability - Adapts to changes in the work environment; Manages competing demands; Changes approach or method to best fit the situation; Able to deal with frequent change, delays or unexpected events.

• Dependability - Follows instructions, responds to management direction; Takes responsibility for own actions; Keeps commitments; Commits to long hours of work when necessary to reach goals; Completes tasks on time or notifies appropriate person with an alternate plan

TECHNICAL COMPETENCIES

• Ability to apply advanced inspection methods.

• Experience in Magnetic Particle Inspection.

• Able to review material data and determine acceptability.

• Tests products for a variety of qualities (dimensions, performance and mechanical or electrical characteristics)

• Provides inspection activity for product throughout production cycle.

• Prepares quality control specifications for project components

PHYSICAL REQUIREMENTS/WORKING CONDITIONS

PHYSICAL DEMANDS

• The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

• While performing the duties of this job, the employee is regularly required to stand; use hands to finger, handle or feel; and reach with hands and arms. The employee frequently is required to walk and talk or hear. The employee is occasionally required to sit; climb or balance; and stoop, kneel, crouch or crawl. The employee must regularly lift and/or move up to 10 pounds, frequently lift and/or move up to 25 pounds, and occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, color vision, depth perception, and ability to adjust focus.

WORK ENVIRONMENT

• The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is occasionally exposed to moving mechanical parts; high, precarious places; and outside weather conditions. The noise level in the work environment is usually moderate
• Conducting MPI/LPI tests on various materials and components to detect surface and near-surface discontinuities.
• Interpret and evaluate test results in accordance with applicable standards, codes, and specifications.
• Prepare inspection reports and documentation detailing the findings and results of the tests.
• Ensure all inspections and tests are conducted in accordance with established procedures and safety guidelines.
• Maintain accurate and detailed records of inspections, test results, and maintenance of equipment.
• Perform routine maintenance and calibration of MPI equipment to ensure optimal performance and accuracy.
• Work closely with other departments, including manufacturing, engineering, and quality control, to address any non-conformances or issues identified during inspections.
• Perform receiving inspection, 100%-dimensional inspection and final inspection of parts and documents in accordance with Canrig and external standards when needed.
• Validating that assembly adheres to standards and procedures and complying with legal requirements.
• Other ad-hoc duties as required