QA Technician Jobs in Texas

Job Title: Quality Assurance Specialist Company: Sierra Nevada Corporation Location: Greenville, TX Description: The Quality Assurance Specialist is a member of the program team with emphasis on the quality requirements derived from the contract, specifications, drawings, and unique program requirements. The primary job of a program QS is to ensure the efficient implementation of the Quality processes as they pertain to programs. The primary job of a QS outside of direct program responsibilities is to efficiently collect metrics, analyze trends and evaluate processes for continual improvements. Additionally, the QA Specialist is responsible for resolving quality issues that impact program cost and schedule. Other responsibilities include assigning appropriate quality codes to Purchase Requisitions, interfacing with Government Quality Representatives concerning program quality issues, participating as a team member in resolving Corrective Action Requests, interfacing with vendors regarding quality issues, and maintaining data collection of quality related program data. The QA Specialist performs in-process inspections/audits and witnesses in-process and acceptance testing when required. The QA Specialist inputs to Cost Of Quality reports at the program level and conducts internal audits at the process/work instruction level to verify compliance to released processes and procedures. SNC job descriptions are meant as summarizations only. They do not necessarily reflect all duties and responsibilities of a position. ESSENTIAL FUNCTIONS: • Contract review for quality requirements. • Review of Manufacturing Work Instructions for appropriate inspection points. • Evaluate current processes, procedures, and instructions for efficiency and streamlining. • Conduct process audits of critical manufacturing process instructions/procedures. • Prepare inspection requirement cards for receiving inspection. • Review and assign quality codes to purchase requisitions. • Perform MRB and Corrective Action requirements. • Perform drawing and specification review as member of Configuration Control Board. • Coordinate with Government Quality Representatives on program quality issues including inspection schedules. • Coordinate with vendors on program quality issues. • Attend and participate in program meetings and reviews. • In-process and Acceptance test monitoring/surveillance. • Track FRACAS data and prepare FRACAS reports when required. • Assist in statistical data collection, analysis, and presentation to illustrate product quality trends. • Punctuality to work each day and prepared to work scheduled work hours. ADDITIONAL RESPONSIBILITIES: • Perform QA Inspector duties as required. EDUCATION/EXPERIENCE REQUIRED: • A.S. Degree in a electronic, mechanical, or industrial technical discipline preferred. • Experience with contract review for quality requirements. • Knowledge and utilization of ISO 9001 and applicable Military Standards and Specifications. • Minimum of five (3) years in an electronic/mechanical systems environment performing similar duties. SKILLS REQUIRED: • Excellent communication skills, both written & verbal. • Ability to work independently and make appropriate decisions. • Strong computer skills are required with good working knowledge of the MS Office Suite, including MS Project. • Ability to read and interpret drawings (electrical & mechanical), parts lists, specifications, instructions, and test procedures. • Strong math skills including basic trigonometry. • Understanding of Geometric Dimensioning and Tolerancing. • Ability to use advanced inspection tools. *SNC is an EEO employer committed to recruiting a diverse workforce. Apply online for immediate consideration at www.sncorp.com or send inquiries to Melanie.Campbell- Register to View

Job Title: Quality Assurance Tech - Production Area Company: Location: Gainesville, TX Description: 1.0 Purpose1.1 This position is responsible for performing start-up and in-process inspection of injection molded plastic products as they come off the press.2.0 Primary Duties and Responsibilities2.1 Perform start-up and hourly in-process inspections following established procedures and work instructions.2.2 Verify that blueprint revision called out on shop traveler matches current blue print revision.2.3 Verify that the material type and color called out on shop traveler is correct.2.4 Verify that part being manufactured matches the part shown on the blueprint.2.5 Perform color verification using the color computer and approved color data.2.6 Complete necessary paperwork and stamp shop traveler indicating acceptance.2.7 Fill out appropriate box labels and affix to outside of boxes.3.0 Education Level Required3.1 Must be able to read, write, and understand English.4.0 Knowledge , Skills and Abilities4.1 Position requires the ability to read and understand blueprints.4.2 Position requires the ability to use basic measurement tools.4.3 Position requires the ability to perform basic math functions.4.4 Position requires the ability to walk and/or stand for extended periods.4.5 Position requires the ability to lift or slide boxes packed with parts.4.6 Position requires the ability to change job functions at a moments notice.5.0 Proficiency in computer usage5.1 Perform basic computer tasks.6.0 Experience Requirement6.1 Minimum of 6 months in a quality function. Must pass pre-employment testing. Must be legally eligible to work in the US. Must pass background check and drug test.Supervisory Experience Required: NoMinimum Pay: $9.25 / HRMaximum Pay: ---Additional Pay Details: ---Workweek: Full Time - 30 hours or more per weekDuration: RegularShift: Evenings (Second)Additional Workweek Details: ---Benefits: ---Veterans Only: NoRecovery Act Job: NoFederal Contractor: NoGreen Job: No

Job Title: Quality Assurance Technician I Company: H-E-B Location: Houston, TX Description: RESPONSIBILITIES OF THE POSITION:Partner is responsible for fundamental understanding of team in development and active participation within a team environment through division and plant team orientation, safety and quality training.- Identify appropriate behaviors for situations requiring ethical decisions- Identify and apply Business Excellence tools at the Yellow Belt Level (e.g. QFD's, FMEA's, OPI's, and categories and types of MUDA).- Define and use the term "Quality" correctly, in the context of raw materials, WIP, and finished goods.- Define a system and process and distinguish between them; understand how the components of a system (inputs/outputs, processes, feedback) impact the system as a whole.- Understand the difference between Partner empowerment and involvement and benefits of both.- Read and understand a quality plan and discern the appropriate tests and examinations required.- Understand variation and apply the concepts of common vs. assignable causes of variation.- Recognize and understand the different types of teams (i.e. Improvement, cross-functional, project, and self-directed) and know which type of team to use in a given situation.- Understand how process improvements (both Kaizen and Breakthrough) achieve results by identifying and eliminating waste and/or reducing variation and optimizing process performance. - Recognize which type of improvement process is appropriate in given situations.- Understand the different improvement-cycle steps in PDCA and apply them appropriately.- Use, interpret, and explain flowcharts, histograms, Pareto charts, scatter diagrams, cause-and-effect diagrams, checklists and check sheets, affinity diagrams, cost of quality reports, benchmarking, brainstorming, and audits as improvement tools.- Understand, explain and apply basic control chart concepts (e.g. centerlines, control limits, out-of-control conditions, and assignable causes of variation) and recognize when control charts should be used.- Understand and apply the concepts of internal and external customers and suppliers to improve processes.- Understand and use different types of customer and supplier feedback (e.g. surveys, ratings, customer complaints, Defect Detection and Control (DD&C)) and understand the value in using data to drive improvement.- Understand the value in communicating supplier expectations and the consequences of supplier performance.- To read and interpret HACCP Plans and Quality Audit Working Papers.- Audit Plant Processes to ensure product quality and food safety standards are in compliance with Plant standards.- Basic knowledge and use of standard laboratory equipment to perform laboratory tests and exams.- Perform routine tests of finished product, work-in-process and raw materials and compares results against specifications to determine quality status (may include chemical, microbial, or physical tests/exams).- Controls non-conforming products in accordance with documented procedures.- Relays appropriate quality results to operating teams (includes presentations during team meetings).- Maintenance of Quality Manufacturing System documentation (e.g. quality work instructions, audit records, corrective action requests).- Trains production team members in the areas of basic quality and food safety- Performs and documents Plant Sanitation Audits- Interacts with Production Team members to improve quality of products produced- Maintains the laboratory in accordance with published 6S standards.- Participates in store and warehouse audits- Develops basic preventive and corrective action plans for improving quality of product producedREQUIREMENTS FOR THE POSITION:- Associates Degree (Two years college level science including laboratory courses OR two years equivalent work experience in an industrial manufacturing plant (not necessarily in a traditional quality area) or comparable experience)- 6S certification must be obtained within 6 months of start date  Basic PC Skills Basic organization skills- Basic knowledge and understanding of H-E-B Quality, Environment and Safety (QES) standards or demonstrated ability to learn and apply such standards- Training in Team Skills (types of teams, roles and responsibilities, team formation and group dynamics, and continuous improvement (see Body of Knowledge for ASQ Certified Quality Improvement Associate.- Basic Math skills (+,-,*,/)- Effective communication skills (written and oral), including basic presentation skills in small group settings.- Bi-lingual language skills a plus- Basic computer skills (i.e., Excel, Word and In-house systems)- Coursework or practical experience in food science, quality management, or other sciences.- Demonstrated ability to solve routine problems.- Basic knowledge of ISO-type Quality System and Hazard Analysis of Critical Control Points (HACCP)- Basic knowledge of Statistics and Quality Auditing preferred.- Knowledge and maintenance of Good Manufacturing Practices (GMP's) - Travel by car or airplane with overnight stays - Lift up to 20 lbs on a regular basis - Lift 20 lbs or more on an occasional basis - Work extended hours- Work rotating schedules - Able to maneuver through the facility and perform the functions of the job, with or without accommodation (standing, stooping, bending, etc.)- Able to work in wet, cold or hot, environments, depending on the Plant location, where temperatures are as listed below:- Snacks - Temperature controlled environment that ranges from 80 to 100 degrees F- Floral - Temperature controlled environment that ranges from 32 to 42 degrees F- Meat - Routinely 30 - 45 Degrees F in a cold and wet environment, occasional (-) 20 or 85 degrees F in certain areas- Milk - Routinely 60 - 80 degrees F in a wet environment, occasionally 38 degrees F in certain areas or 110 Degrees in other areas- Ice Cream - (-) 40 to 80 Degrees F, certain areas in a wet environment- Bakery - 80 to 100 Degrees F- Tortilla - 80 to 100 Degrees F

Job Title: LEAD QUALITY ASSURANCE SPECIALIST Company: LanceSoft, Inc. Location: Austin, TX Description: Client: Department of Veterans Affairs Place of Performance: Austin, TX 78772 Period of Performance: 1 year Contract (with 3 optional years) Requirements - "Must-Have": Certified Software Quality Analyst (CSQA) Certified Software Quality Engineer (CSQE) Information Technology Infrastructure Library (ITIL) certifications Six Sigma certifications Active "Secret/ Top-Secret" Security Clearance Responsibilities: Shall provide a lead role in the development and maintenance of the project Software Quality Assurance Plan as well as creation and implementation of procedures that conform to the requirements of the various FLITE contracts, relevant standards, and relevant guidelines. Shall also lead in the formation of independent assessments of how the project's software development process is being implemented relative to the defined process and recommends reasonable methods to improve the organization's process. Shall provide substantial advice, assistance, and functional knowledge to other staff. Shall serve as a key resource for facilitating quality assurance activities. Shall also manage and direct other quality assurance specialists. Configure, implement, and deploy IBM?s MAXIMO software application as a tool for managing all classes of physical assets, supply inventories, real property, and related workforce management, in a single integrated database accessible throughout the department. Shall attend and complete VA provided indoctrination on the VA configured IBM Rational Suite which the COTR will schedule with the IV&V contractor at the initial kick-off meeting. Shall provide a written Review Report for each review performed. Shall document results of reviews in the VA configure IBM RATIONAL Suite. Shall recommend best practices for the use of the VA configured IBM RATIONAL Suite, MAXIMO, and other Federal financial management or Enterprise Resource Planning (ERP) solutions. Shall participate in review and update of IBM RATIONAL Suite as used for the FLITE (PMOS), SAM, and IFAS Projects. Shall be a subject matter expert on IBM RATIONAL Suite and contribute to the management of this tool including formulating and documenting policies and procedures related to the use, operation, and maintenance of this software. If interested, kindly revert to this advertisement mentioning the Job Title along with an updated version of your resume to Register to View Thanks!!

Job Title: QC/QA Technician Company: Aerotek Location: Richardson, TX Description: An electronics company in the Richardson, TX area is looking for a qualified Quality Control technician. All applicants must be IPC-A-610 and/or J-STD-001 Certified for PCB's. Must have strong previous experience with QC on PC boards. This position will require keeping accurate QC records and along with reading blue prints and BOM's for First Article Inspections.

Job Title: Quality Assurance Lab Technicians Company: TMK IPSCO Location: Baytown, TX Description: TMK IPSCO operates in North America as a division of TMK, the largest pipe producer in Russia and one of the three global market leaders. TMK IPSCO is a leading producer of energy tubulars including oil & gas well casing and tubing, line pipe, drill pipe, standard pipe and hollow structural sections. TMK IPSCO operates one steel mill and nine pipe mills and product finishing facilities in seven states across the United States and also manufactures premium connections for oil and natural gas drilling and production under the ULTRA brand name.We are currently seeking Quality Assurance Lab Technicians for our Baytown, TX plant. The successful candidates will prepare/test tubular product samples for mechanical performance properties and chemical product check analysis.  ESSENTIAL DUTIES INCLUDE, BUT ARE NOT LIMITED TO:Operating and calibrating of OES spectrometers Performing hardness testing, tensile testing, and charpy v-notch impact testing Performing proper sample preparation methods and techniques for the above testing Operating all tools and equipment required to properly prepare all types of samples for testing; tools and equipment to include: -          vertical and horizontal band-saws-          plasma cutting system-          bench grinders-          various belt sanders-          various measuring equipmentPerforming other duties as requiredMINIMUM REQUIREMENTS:·         High school diploma or GED·         Minimum 1 year experience operating industrial machinery such as Lathes, Grinders, etc. and/or working in a Lab or Quality Assurance environment·         Knowledge of tubular manufacturing processes and API specifications (5CT) is highly desired ·         Must be a motivated self-starter with mechanical skills and ability to operate equipment safely·         Knowledge of basic math and computer skills·         Ability to read, write and speak English·         Attention to detail·         Neat in workmanship and writingWe offer very COMPETITIVE PAY and an excellent BENEFITS and BONUS package available on day one – NO WAITING PERIOD!TO APPLY: E-mail:  Register to View -IPSCO.com Please submit your resume in Microsoft Word format only and include the job title “Quality Assurance Lab Technicians” in the subject line. TMK IPSCO is proud to be an equal opportunity employer.

Job Title: MECHANICS & QA LAB TECHNICIANS Company: IPSCO KOPPEL TUBULARS Location: Houston, TX Description: TMK IPSCOHouston, Register to View -ipsco.comTMK IPSCO operates in North America as a division of TMK, the largest pipe producer in Russia and one of the three global market leaders. TMK IPSCO is a leading producer of energy tubulars including oil & gas well casing and tubing, line pipe, drill pipe, standard pipe and hollow structural sections. TMK IPSCO operates one steel mill and nine pipe mills and product finishing facilities in seven states across the United States and also manufactures premium connections for oil and natural gas drilling and production under the ULTRA brand name.We currently have the following opportunities available at our Baytown, TX plant.Mechanical Maintenance HelpersThe successful candidates will assist Mechanical Maintenance Technicians with preventative and corrective maintenance. Duties to includelubrication, forklift operation, preventative maintenance, mechanicalassembly/disassembly, welding (stick/structural) and housekeeping to ensure a safe work environment.Candidates must possess a HS diploma or GED, a minimum of 1 year mechanical experience or equivalent education, ability to read/write/speak English, basic tool knowledge and good math skills. Mechanical training/apprenticeship, previous welding experience and possession of own tools are desirable.QA Lab TechniciansThe successful candidates will prepare/test tubular product samples for mechanical performance properties and chemical product check analysis.Candidates must possess a HS diploma or GED and a minimum 1 year experience operating industrial machinery such as Lathes, Grinders, etc. and/or working in a Lab or Quality Assurance environment. Knowledge of tubular manufacturing processes and API specifications (5CT) is highly desired. Must be a motivated self-starter with mechanical skills and ability to operate equipment safely. Requires knowledge of basic math and computer skills, ability to read/write/speak English, and good attention to detail.We offer very COMPETITIVE PAY and an excellent BENEFITS andBONUS package available on day one - NO WAITING PERIOD!TMK IPSCO Koppel Tubulars2600 Texas Hwy 99Baytown, TX 77523Job Line: Register to View Please email your resume in Microsoft Word format only Register to View -ipsco.com with the position of interest in the email subject line.TMK IPSCO is a proud equal opportunity employer.

Job Title: Quality Assurance Specialist Company: Security Service Federal Credit Union Location: San Antonio, TX Description: Assists Business Analysts in providing the critical bridge between "users" and technical staff by identifying true business needs and assessing the available technologies to meet those needs. Works on development projects of varying magnitude and help to ensure the testing and implementation are both timely and are satisfactory to management and users. Assists Delivery Excellence personnel in the use of standard methodology, executes test scripts, tests cases and ad hoc testing; assists in project defect tracking and reporting and performs testing admin tasks. Uses standard methodologies to support the delivery of quality products that meet client specifications with minimum defects, on-time, and on-budget. Adheres to quality assurance milestones outlined for projects and executes the identified activities and processes to ensure compliance. Participates on teams in requirements gathering, designs reviews and creation of detailed testing scripts and test cases. Assists with coordination and execution of multi-phase testing including integration, system, performance and user acceptance testing, performing on-going regression testing across multiple applications and systems. Performs other duties as assigned. Requirements: · Bachelor’s degree in Management Information Systems (MIS), Computer Science, or Business-related field or comparable education or comparable experience. · Requires 3 years experience in a large financial institution or comparable experience. · Requires excellent interpersonal, analytical, written and verbal communication skills. · Experience or training with one or more of the following tools: Advanced Microsoft Excel, Word, PowerPoint, Visio and Microsoft Project or similar tools. · Experience preferred with test management and automated testing tools such as, but not limited to, Quality Center and Quick Test Professional. · Basic understanding of structured application development methodology and principals, understanding of structured environments using distinct development, test, and production environments. · Proven experience in participating in projects and ability to work with minimal supervision. Ability to work in a team environment, meet deadlines and take on responsibility and accountability. Search is being limited to the San Antonio, TX area. We are proud to be an EEO/AA/M/F/D/V employer. We maintain a drug-free and safe workplace by performing post offer, pre-employment substance abuse testing and criminal background checks. Consumer credit history checks are also performed.

Job Title: Quality Assurance Specialist - Dietary Supplements Company: AmeriSciences Location: Houston, TX Description: Job DescriptionPosition will report to the Director of Quality & Product Development, and assist him with the following tasks:-          Quarantine and release of incoming Finished Product Goods-          Entry-level laboratory QC operations (i.e. physical testing, basic wet chemistry)-          Coordination of third-party testing program (scheduling testing, shipping samples, lab qualification, follow-up, etc)-          QA supervision of basic hand-packaging operation (work order issuance & review, line-clearance, cycle count, packaging release)-          Inspection and release of product returns-          Inspection and release of labeling-          Investigation of quality-related complaints-          GMP self-audits (packaging, laboratory, warehousing and distribution operations)-          Writing, proofing and/or reviewing of Standard Operating Procedures-          Assist in Vendor Qualification and Vendor Auditing (contract manufacturers, contract warehousing and distribution, contract laboratories)-          Issuance of product-related reports (inventory, rotation, ordering)-          Other clerical and operational activities as neededCandidate QualificationsDietary supplement experience and familiarity with cGMP a must Experience in packaging and warehousing operation QA Label review experience (Supplement Facts, structure/function claims, etc)SOP writing and understandingAnalytical Lab experience (i.e. physical tests, titrations) a plus, but not requiredBilingual (Spanish) preferred, but not required College education (BS or MS) preferred, but can be obviated by length of experience in the fieldIdeal candidate will have experience in pharma or dietary supplement environment, and is familiar with Title 21 CFR regulations - particularly Part 111 (current Good Manufacturing Practices).

Job Title: Quality Assurance Specialist Company: Location: Austin, TX Description: PharmaForm LLC, located in Austin, Texas, has built a reputation both nationally and internationally for delivering novel and innovative solutions to challenging problems in pharmaceutical product development, manufacturing, and analytical services. We provide contract services with client groups varying from small virtual companies to large pharmaceutical organizations. We are currently seeking a Quality Assurance Specialist to join our team. Job Summary: The Quality Assurance Specialist facilitates and assists in execution of systems to assure GMP compliance for all relevant operations carried out within and for PharmaForm. This function includes: