Failure Analysis Engineer Jobs

Job Title: Failure Analysis Engineer Company: ManPower Location: Albuquerque, NM Description: Failure Analysis Engineers in Albuquerque, NM - You’ve imagined it many times. You’re working at a company that challenges you to innovate and encourages you to apply your talent and knowledge. Where you’re empowered and expected to make decisions that propel business growth. Where you receive compensation worthy of your sterling accomplishments. If that’s your vision, but not your current reality, Manpower Professional has a career opportunity for you. In this Failure Analysis Engineer position, you'll have the opportunity to: • Design, develop, implement, and analyze technical products and systems. Performs engineering design evaluations. • May develop a range of products. • Recommends alterations to development and design to improve quality of products and/or procedures. Candidate Profile Are you interested? The ideal Failure Analysis Engineer candidate will possess: • Degree preferred is Electrical Engineering or Social Science Physics. • 2 years in electronic component FA/DPA lab, including use of curve tracer, microscopes and deconstruction equipment/methods. • Expert or proficient w/ current FA methodologies and formulating, executing FA plans. Candidate Skills You can see it. More challenging work. A more interesting work environment. The opportunity to use your finely honed skills to make a real difference. And to collect pay that reflects your talent and expertise. If this is what you see for yourself, you need to talk to Manpower Professional.

Job Title: Failure Analysis Engineer Company: Intel Corporation Location: Hillsboro, OR Description: As a Failure Analysis Engineer you will be responsible for identifying and researching from Si process component failures to improve product yield, quality and/or reliability. Your responsibilities will include but not be limited to:- Evaluates the electrical, thermal and mechanical characteristics of integrated circuits, components, sub-components, and systems to determine the root cause of failure.- Analyzes failure reports and recommends corrective action to prevent reoccurrence of problems.- Uses all standard electronic test equipment (digital/analog) systems to do board failure analysis and debug.- Support new product transfer and startup and the automation and improvement of the failure analysis process.- Ensure that the FA capabilities needed to support advanced technology and/or product development are in place. May necessitate the development of improved/new tools and methods.- Collaborating with device and process development engineers to determine the relationship of materials properties to electrical performance and other Quality/Reliability Engineers to assist in risk assessment.

Job Title: Engineer-Failure Analysis/Metal/Root Cause Company: Think Energy Group Location: New York, NY Description: A Metallurgist is needed in New York. Must be a US Citizen.Responsibilities:-> Evaluate, analyze and test a variety of materials, including but not limited to steel,alloys and superalloys in support of a wide range of industriesRequirements:-> 7-10 years of experience as a Metallurgist-> BS degree in Metallurgy or Material Science-> Experience with Root Cause analysis and Failure Analysis on Metals is a MUST-> Experience in specialty or advanced metals, direct laboratory experience-> U.S citizenship required due to the nature of the work for some clientsBenefits:-> Very competitive total compensation and Benefits-> 401(k)-> Relocation assistance is available for the right candidate Related Words: metallurgical, materials research, material science, metallurgy, materials science, metallurgy, materials engineering, material engineering, steel qualities, deep drawing, commercial steel, forming steel, phase dynamics, annealing, hot rolling, plastic strain, r values, n values, elastic strain, spring back, rolling mill, bs material science, material science engineer, metallugist, ms material science, metallurgist, metallurgist, metalurgist http://www.thinkenergygroup.com/think.nsf/applynewexpress?openform&ParentUNID=609E41C7D51D28A Register to View 9FBA&frm=Nation&frm1=Nation Think Energy Group   See all jobs in NEW YORK NY

Job Title: Failure Analysis Engineer Company: SanDisk Location: Milpitas, CA Description: In this position, the individual will be responsible for performing failure analysis on Nand memory in mult-die package by using bench-top testing and electrical measurement tools to isolate and characterize the cause of failure and by using failure analysis tools and techniques to isolate and characterize the physical defects. The individual will then be responsible for writing clear reports to summarize findings and recommend countermeasures. The individual will also evaluate the electrical and mechanical characteristics of systems and/or integrated circuits, components, sub-components and systems to determine the cause of failure, including the verification of analog and digital performance and develop methods, processes, procedures and equipment that will improve the failure analysis process and/or reduce failures. This position requires BS/BA degree or equivalent with 3 or more years of related experience. The ideal individual must have proven ability to achieve results in a fast moving, dynamic environment. Self-motivated and self-directed, however, must have demonstrated ability to work well with people. A proven desire to work as a team member, both on the same team and outside of the team. Ability to troubleshoot and analyze complex problems. Ability to multi-task and meet deadlines. Excellent communication (written and verbal) and interpersonal skills. SanDisk offers a highly competitive compensation package and great benefits, which include Stock Options, ESPP, matched 401 (K), comprehensive insurance and tuition reimbursement. SanDisk is an equal opportunity employer.

Job Title: Sr Failure Analysis Engineer Company: Jabil Circuit Inc. Location: San Jose, CA Description: The Sr. FA engineer is defined as the corporate FA team’s subject matter expert for global FA support. The Sr. FA Engineer leads the investigation, analysis, and root-cause identification of product or component failure for complex projects.  The Sr. FA engineer also actively supports the Global & regional FA initiatives by providing methods training, development of standardized processes, and dissemination of knowledge gained through training and education. Essential Duties and Responsibilities • Support global/regional requests for complex Failure Analysis from Jabil’s workcells, business units, manufacturing operations, supply chain, and customers• Organize and manage complex FA projects. This includes, as required, developing a statement of work and analysis plan, provide budgetary quotes, and sourcing third party analytical services. Manage projects of diverse scope as every failure is different so this role always presents new and varied challenges.• Train and support lab technicians with test methods and techniques, and data gathering. • Interact with various departments (Quality, Purchasing, and Manufacturing) to resolve/improve component or process issues.• Strategize and discuss with senior management, the future direction and trends in analytical technology and make recommendations.• Create and organize appropriate documentation and records. This includes FA related global procedures and processes.• Attend and/or present at customer meetings in support of Jabil business development, as required • Attend seminars and conferences associated with relevant FA topics as a representative of Jabil GOS• Design experiments to ensure results obtained are specific to goals set• Perform DOE, CPK analysis, Gage R&R studies, and other tools for group projects• FA consultation services to Jabil workcells and customers as required• Demonstrate flexibility and a sense of urgency in responding to escalation of FA requests from the Plants or any of the Regional FA groups. • Promote positive working relationships with Jabil sites and other regional FA groups• Complete training requirements identified by department manager• Adhere to company’s standard operating procedures• Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.• Comply and follow all procedures within the company security policy. Job Requirements MINIMUM REQUIREMENTSBachelor’s degree from a four year university in Mechanical Engineering Material Science with at least five to eight years in printed circuit board assembly (PCBA) failure analysis to include but not limited to PCB failures component failures solder joint failure analysis and contamination analysis. Experience with different analytical test methods such as SEM EDX FTIR XRF TGA DSC and sample preparationp preferred. Domestic and international travel is required.LANGUAGE SKILLSAbility to read analyze interpret and communicate regarding common scientific and/or technical journals financial reports and legal documents.  Ability to respond to common inquiries or complaints from customers regulatory agencies or members of the business community.  Ability to effectively present information to top management public groups and/or boards of directors.  Advanced PC skills including training and knowledge of Jabil’s software packages.  MATHEMATICAL SKILLSAbility to work with mathematical concepts such as probability and statistics statistical inference  fundamentals of plane and solid geometry and trigonometry understanding of partial differential equations integration and numerical techniques. Expertise in applying concepts such as fractions percentages ratios and proportions to practical situations.REASONING ABILITYAbility to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists.  Ability to interpret a variety of instructions furnished in written oral diagram or schedule form. Ability to collect data establish facts and draw valid conclusions. Proven ability to interpret an extensive variety of technical instructions in mathematical or diagram form and effectively deal with several abstract and concrete variablesPHYSICAL DEMANDSThe physical demands described here are representative of those that must be met by a team member to successfully perform the essential functions of this job.  Ability to work effectively under pressure with constantly changing priorities and deadlines.  Individual may be required to sit stand walk regularly and occasionally lift up to 15 lbs.  Be accessible to production floor and office staff and to use required office equipment.  Specific vision requirements include reading of written documents and use of computer monitor screen frequently. WORK ENVIRONMENTThe work environment characteristics described here are representative of those a team member encounters while performing the essential functions of this job.  Individual’s primary workstation is located in the office area where the noise level is low.  Team member may frequently be present on the manufacturing floor where the noise level is low to moderate. Additional Information Successful applicants will have to fulfill all prerequisites for contracts.  Certain positions may require U.S. citizenship. Jabil is an Equal Opportunity Employer M/F/D/V.

Job Title: Failure Analysis Engineer, IC, FA, Light Emission Microscopy, Company: Cybercoders.com Location: Irvine, CA Description: Failure Analysis Engineer, IC, FA, Light Emission Microscopy, Failure Analysis Engineer, Integrated Circuit, IC, Mircroelectronic, LEM, Light Emission Microscopy, - Skills Required - Failure Analysis Engineer, Integrated Circuit, IC, Mircroelectronic, LEM, Light Emission Microscopy,Microelectronics Failure Analysis EngineerIf you are the kind of engineer that can take an Integrated Circuit ( from any manufacturer) that is not working, and find out WHY, we have the job for you with a world leader in microelectronics failure analysis. We currently need a FAILURE ANALYSIS ENGINEER for our independent lab that provides failure analysis and reliability testing services for microelectronic industries. In this role, you will be responsible for leading your own failure analysis efforts, and perhaps those of other FA engineers in root cause device level failures, writing FA reports, teaching junior FA engineers leading edge fault isolation techniques and interfacing with customers. Because of the sometimes extensive contact with our customers, this position requires that you have good communication skills, that you are proficient at technical report writing and that you have a favorable customer service demeanor.As far as qualifications, this is the type of background that we are looking for:Candidates must have a BSEE or an equivalent background. Hands on experience with curve tracers, microprobe, fault-finding techniques, IC de-processing, and electron microscopes is necessary.Current experience in locating defects or issues effecting performance of circuits. We would like to find someone with extensive experience with various die level fault isolation techniques. Hands on experience with light emission microscopy, IR-Microscopy, various Laser injection techniques, SQUID microscopy, TDR, SEM, IC test and other related FA tools is necessary. IC fabrication, IC test and a device physics background are beneficial. This is not an easy job, but you feel you have the right stuff and that you can tackle this position, you will be rewarded by an excellent compensation and benefit package and an opportunity to work in a fast-paced, technically challenging environment on a daily basis!Please get in touch with me right away if this sounds like an ideal role for your background and career path.Russ Holland(see below) - RH-LEMFAEngineerCA - , , , , , CyberCoders CyberScientific

Job Title: Failure Analysis Engineer, IC, FA, Light Emission Microscopy, Company: Cybercoders.com Location: Santa Ana, CA Description: Failure Analysis Engineer, IC, FA, Light Emission Microscopy, Failure Analysis Engineer, Integrated Circuit, IC, Mircroelectronic, LEM, Light Emission Microscopy, - Skills Required - Failure Analysis Engineer, Integrated Circuit, IC, Mircroelectronic, LEM, Light Emission Microscopy, Microelectronics Failure Analysis Engineer If you are the kind of engineer that can take an Integrated Circuit ( from any manufacturer) that is not working, and find out WHY, we have the job for you with a world leader in microelectronics failure analysis. We currently need a FAILURE ANALYSIS ENGINEER for our independent lab that provides failure analysis and reliability testing services for microelectronic industries. In this role, you will be responsible for leading your own failure analysis efforts, and perhaps those of other FA engineers in root cause device level failures, writing FA reports, teaching junior FA engineers leading edge fault isolation techniques and interfacing with customers. Because of the sometimes extensive contact with our customers, this position requires that you have good communication skills, that you are proficient at technical report writing and that you have a favorable customer service demeanor. As far as qualifications, this is the type of background that we are looking for: Candidates must have a BSEE or an equivalent background. Hands on experience with curve tracers, microprobe, fault-finding techniques, IC de-processing, and electron microscopes is necessary. Current experience in locating defects or issues effecting performance of circuits. We would like to find someone with extensive experience with various die level fault isolation techniques. Hands on experience with light emission microscopy, IR-Microscopy, various Laser injection techniques, SQUID microscopy, TDR, SEM, IC test and other related FA tools is necessary. IC fabrication, IC test and a device physics background are beneficial. This is not an easy job, but you feel you have the right stuff and that you can tackle this position, you will be rewarded by an excellent compensation and benefit package and an opportunity to work in a fast-paced, technically challenging environment on a daily basis! Please get in touch with me right away if this sounds like an ideal role for your background and career path. Russ Holland (see below) - RH-LEMFAEngineerCA - , , , , , CyberCoders CyberScientificdf-lj

Job Title: Optical Disk Drive / DVD Failure Analysis Engineer Company: Northwest Contract Services Location: Redmond, WA Description: We have an urgent need for an optical disk drive failure analysis engineer. This is a contract position. Only candidates meeting job description qualifications below will be contacted immediately. Apply direct to Register to View Engineering EE support for ODD Failure Analysis:* Collect and organize failure data and analyze for trends to provide direction failure analysis and root cause investigation.* Assess the severity of failure modes based on prior data, and correlate to field failure rates.* Create clear and detailed test plans as needed for design of experiments or new test cases to perform failure analysis. * Prioritize testing and failure analysis tasks for external lab based on trend analysis of failures.* Drive lab with regards to schedule and prioritization of tasks for failure analysis and root cause investigation.* Consolidate the detailed engineering test results and failure analysis reports into concise presentations to communicate to non-Engineering teams.* Feedback failure analysis findings and recommendations to development engineering teams and quality engineering as appropriate.* Participate in corrective action plan creation and integration into manufacturing or test of the ODDs.* Create and drive plans for monitoring of corrective actions to validate their effectiveness.* Support DVD drive manufacturing and R&R process improvementsMinimum qualifications:BSEE and 7+ years experience with optical/DVD drive design/manufacturingA solid understanding of core engineering principles, electronics design and analysisExcellent verbal and written communication skillsStrong bench evaluation and in-lab debugging skillsKnowledge of high volume consumer electronics design and manufacturing

Job Title: Failure Analysis Engineer Company: Stryker Location: Kalamazoo, MI Description: Stryker is an exceptional company with exceptional people who deliver exceptional results. We have differentiated ourselves by advancing meaningful innovations, creating cost-effective solutions for and improving the lives of our global customers and patients. As a winner of the 2007 and 2008 Gallup Great Workplace Award, we have demonstrated that Stryker has one of the most productive and engaged workforces in the world. Our exceptional results fuel ongoing opportunities for Stryker employees to build outstanding careers and to develop and grow both personally and professionally. Our work environment attracts many different kinds of talented and driven people who love to win and serve others. We always put quality first. We hold ourselves accountable to reach or exceed our goals and continually improve everything we do. These attributes are shared by the employees that make up Stryker. They are the things that bring us together and serve as the foundation of all we do. And they are the enablers of both our past and future success.Stryker is one of the world’s leading medical technology companies with the most broadly based range of products in orthopaedics and a significant presence in other medical specialties. The Company's products include implants used in joint replacement, trauma, craniomaxillofacial and spinal surgeries; biologics; surgical, neurologic, ear, nose & throat and interventional pain equipment; endoscopic, surgical navigation, communications and digital imaging systems; as well as patient handling and emergency medical equipment. For more information about Stryker, please visit the company web site at: http://www.stryker.com. This position is part of the Complaint Handling Process Improvement Initiative.•Failure analysis of products returned for service at Instruments Division in Kalamazoo. •Develop a comprehensive list of known failure modes and relevant root cause information for product families.•Create diagnostic procedures and data sheets for Quality Technicians to use for diagnosis of returned products.•Where applicable, develop prescription for repair of the returned product.•Perform component level analysis based on findings during failure analysis of products, i.e. e-Box failures, motors etc. to determine second level root cause information to drive continuous improvement of selected products.-NOTE: This position requires experience with the direct design of the product and sub-assembly AND failure analysis of the product, sub-assembly, and components.-Bachelor’s Degree in Engineering – Mechanical preferred-3 years of R&D experience•Bachelor’s Degree in Engineering – Mechanical preferredStryker is an equal employment opportunity/affirmative action employer committed to hiring a diverse workforce.To read more about Stryker, please visit our website at www.stryker.jobs.

Job Title: Electrical Engineer ' Failure Analysis Lab Company: ITT Defense Electronics & Services Location: Rochester, NY Description: ITT Space Systems Division in Rochester (NY) is seeking an Electrical Engineer ' Failure Analysis Lab who will provide engineering and engineering support as an individual contributor to the Division's Engineering business unit under technical direction. This position requires a specific knowledge of microelectronic parts construction, failure modes and destructive physical analysis methods. Scope and Principle Duties: Primary responsibilities include performing failure analysis and destructive physical analysis of electronic and mechanical components and subassemblies. May also participate in such activities as: development and preparation of quality control and inspection methods and procedures; analysis and development of quality information systems, auditing, investigation and evaluation of equipment designs, processes and manufactured equipment to assure conformance to established quality standards, specifications, and customer requirements; surveillance of test and inspection activities; development of reliability predictions and assessment of reliability problems; liaison with customers, subcontractors, vendors and military agencies. May also participate in design reviews on assigned programs. Job Specifications and Work Performed: ' Performs Destructive Physical Analysis (DPA) according to military, customer and internal specifications. ' Performs Failure Analysis (FA) according to military, customer and internal specifications. ' Produces detailed reports of analyses and is responsible for the storage and maintenance of the data base where reports are stored and published. ' Performs special assignments as requested. May be required to perform other assignments which are normally related to the work of higher or lower engineering classifications. Approximately 80% of the time will be spent in the lab performing analyses and running tests. ' Interfaces and works with outside independent laboratories to supplement the labs capacity/technical capabilities. ' Develops and implements test/operating procedures while selecting appropriate test instrumentation. ' Helps direct the development of the lab and participates in capitol and reviews and lab improvement planning. Responsibility and Authority: Works under general supervision. Follows detailed instructions or established procedures where work is reviewed for soundness or technical judgment and adequacy. Responsible for maintaining good employee relations with customers and co-workers. Competencies Needed: ' Knowledge of microelectronic device assembly, microelectronic packaging methods and materials is required. Knowledge of common failure modes and mechanisms associated with microelectronic devices is desired as is knowledge of failure analysis tools commonly used in a failure analysis or physics of failure laboratory. Basic knowledge of quality and reliability methods and procedures, military specifications or software systems and methods as they apply to the electronics and space industry. Must have a general understanding of basic business competencies and business unit operations as well as area reporting structures. ' Experience with scanning electron microscopy (SEM), optical microscopy, analog/digital electrical tests (oscilloscopes etc.), potting and cross sectioning techniques and physical testing of microelectronic parts (wire bond pull, die shear, etc.). Experience Requirements: Education and Experience: Requires B.S. degree, preferably in Electrical or Materials Engineering or in a technical area of science and research. Experience Required: Minimum 2 years. Working Condition: General office environment, laboratory, manufacturing area, or research areas requiring the ability to stand or site for long periods of time. Personal protective equipment may be required to be used. Position requires the ability to work with computers and may be required to lift up to 25 pounds. Security Clearance: This position may require the passing of both a background investigation and polygraph to achieve a variety of compartmented national security clearances. The individual holding this position must be a U. S. Citizen. Disclaimer: The above information on this description has been designed to indicate the general nature and level of work performed by employees within this classification. It is not designed to contain or be interpreted as a comprehensive inventory of all duties, responsibilities, and qualifications required of employees assigned to this job. Position Reports To: Engineering Supervisor ITT is an Equal Opportunity / Affirmative Action Employer. M/F/D/V